Dap-Audio HP- 900 2U 2X450w Amplifier










Dap-Audio HP- 900 2U 2X450w Amplifier
289.05€
- Stock: Available
- Brand: DAP
- Model: HL.D4176
- Weight: 10.00kg
- EAN: 8717748425478
• Full protection circuits
• Efficient forced air cooling
• Stereo & Bridge mode
The HP Series power amplifiers by DAP Audio are the obvious choice for musicians, DJs, and entertainers and also perfectly suited for permanent installation in discos, pubs or public areas.
The DAP Audio HP Series includes five power-amp models with outputs ranging from 200W to 1400W RMS stereo at 4 Ohms. The solid yet fashionable housings all hold forced air-cooling systems and the best protection circuits, ensuring many years of reliable amplification.
The HP-500 and HP-900 are ideal for pubs, bars, and parties. These class AB power amps deliver enough output to make everyone sing along and dance to their favorite tunes.
These amplifiers truly are the best choice wherever quality and reliability at affordable prices are required.
The DAP HP Series power amplifiers are the solution when true quality is needed in an affordable price range. The HP Series are 5 models representing output powers from stereo 200W until 1400W. All including the best protection circuits and built in a strong solid housing to achieve many years of reliable power. They are the best mobile choice for musicians, DJs, and entertainers but also perfect for installations in discos, pubs or any kind of public areas
Output Power
Stereo 2Ohm: Not Allowed
Stereo 4Ohm: 2x 450 Watt RMS
Stereo 8Ohm: 2x 350 Watt RMS
Bridge 2Ohm: Not Allowed
Bridge 4Ohm: Not Allowed
Bridge 8Ohm: 1x900 Watt RMS
Frequency Response: 10Hz - 20KHz, +/-1dB
THD: <0.5%
S/N rate: >100dB A-weighted
Crosstalk: >75dB
Damping Factor: >250 8 OHM
Gain: 32dB
Input Sensitivity: 0,85V (+/-1dBv)
Input Impedance: 20kOhm balanced, 10kOhm unbalanced
Output Mode: Stereo / Parallel / Bridge
Amp Technology: Class AB
Protection: Clip Limiter (Fixed)
Short Circuit
Overheat
Overload
DC Voltage
Cooling: Forced-air by axial fan
Airflow: Front to side
Input Connectors: 3-pin XLR
Output Connectors: Speakon
Power Connector: IEC
Input Voltage: 210~240VAC, 50/60Hz
Dimensions: 483 x 310 x 88mm
Weight: 10Kg
• Efficient forced air cooling
• Stereo & Bridge mode
The HP Series power amplifiers by DAP Audio are the obvious choice for musicians, DJs, and entertainers and also perfectly suited for permanent installation in discos, pubs or public areas.
The DAP Audio HP Series includes five power-amp models with outputs ranging from 200W to 1400W RMS stereo at 4 Ohms. The solid yet fashionable housings all hold forced air-cooling systems and the best protection circuits, ensuring many years of reliable amplification.
The HP-500 and HP-900 are ideal for pubs, bars, and parties. These class AB power amps deliver enough output to make everyone sing along and dance to their favorite tunes.
These amplifiers truly are the best choice wherever quality and reliability at affordable prices are required.
The DAP HP Series power amplifiers are the solution when true quality is needed in an affordable price range. The HP Series are 5 models representing output powers from stereo 200W until 1400W. All including the best protection circuits and built in a strong solid housing to achieve many years of reliable power. They are the best mobile choice for musicians, DJs, and entertainers but also perfect for installations in discos, pubs or any kind of public areas
Output Power
Stereo 2Ohm: Not Allowed
Stereo 4Ohm: 2x 450 Watt RMS
Stereo 8Ohm: 2x 350 Watt RMS
Bridge 2Ohm: Not Allowed
Bridge 4Ohm: Not Allowed
Bridge 8Ohm: 1x900 Watt RMS
Frequency Response: 10Hz - 20KHz, +/-1dB
THD: <0.5%
S/N rate: >100dB A-weighted
Crosstalk: >75dB
Damping Factor: >250 8 OHM
Gain: 32dB
Input Sensitivity: 0,85V (+/-1dBv)
Input Impedance: 20kOhm balanced, 10kOhm unbalanced
Output Mode: Stereo / Parallel / Bridge
Amp Technology: Class AB
Protection: Clip Limiter (Fixed)
Short Circuit
Overheat
Overload
DC Voltage
Cooling: Forced-air by axial fan
Airflow: Front to side
Input Connectors: 3-pin XLR
Output Connectors: Speakon
Power Connector: IEC
Input Voltage: 210~240VAC, 50/60Hz
Dimensions: 483 x 310 x 88mm
Weight: 10Kg
Transit Time
> to Italy: 2/4 days. UPS courier**
> to Europe: 5/7 days.
**Above 70kg total, goods travel with truck services, transit time may vary