Utility DMX Accessories

Suitable for converting 4 universes to a single CAT cable75 cm long cablesColour coded for easy identificationDigital 110 Ohm DMX cable The Showgear CS-4F/3 is a 4-channel colour coded DMX Shuttle for connecting four male 3-pin DMX connectors to a male RJ45 internet data connector. This allows you to send data of four universes through one single CAT cable. All four female DMX connectors are colour coded for easy identification and have a cable length of 75 cm. We recommend to use a shielded CAT..

Suitable for converting 4 universes to a single CAT cable75 cm long cablesColour coded for easy identificationDigital 110 Ohm DMX cable The Showgear CS-4F/5 is a 4-channel colour coded DMX Shuttle for connecting four male 5-pin DMX connectors to a male RJ45 internet data connector. This allows you to send data of four universes through one single CAT cable. All four female DMX connectors are colour coded for easy identification and have a cable length of 75 cm. We recommend to use a shielded CAT..

Suitable for converting 4 universes to a single CAT cable75 cm long cablesColour coded for easy identificationDigital 110 Ohm DMX cable The Showgear CS-4M/3 is a 4-channel colour coded DMX Shuttle for connecting four female 3-pin DMX connectors to an RJ45 internet data connector. This allows you to send data of four universes through one single CAT cable. All four male DMX connectors are colour coded for easy identification and have a cable length of 75 cm. We recommend to use a shielded CAT cab..

Suitable for converting 4 universes to a single CAT cable75 cm long cablesColour coded for easy identificationDigital 110 Ohm DMX cable The Showgear CS-4M/5 is a 4-channel colour coded DMX Shuttle for connecting four female 5-pin DMX connectors to an RJ45 internet data connector. This allows you to send data of four universes through one single CAT cable. All four male DMX connectors are colour coded for easy identification and have a cable length of 75 cm. We recommend to use a shielded CAT cab..

Ideally, a DMX Data line will have a DMX Terminator connected across the two data wires. Without DMX Terminator, reflections of fast driver edges can cause data corruption. The DMX Terminator also reduce electrical noise sensitivity due to the lower impedance. Connector: 3 pin XLR MaleImpedance: 110 Ohm..

Ideally, a DMX data line will have a DMX Terminator connected across the two data wires. Without DMX Terminator, reflections of fast driver edges can cause data corruption. The DMX Terminator also reduce electrical noise sensitivity due to the lower impedance. Connector: 5 pin XLR MaleImpedance: 110 Ohm..

Convert the signal from DMX-512 to 72 CH. ANALOGUE output.• Convert the signal from MIDI to 72 CH. ANALOGUE output.• The front panel alpha-numeric display shows the DMX start address and programming options.• The last scene remains when DMX disappears.• Pre-store a scene and is available for emergency.• Memory backup with EEPROM.• CHASE function can be selected from 1 to 72 channel & speed control.• Select ANALOGUE output from +(-)10V, +(-)12V and +(-)15V.• Receive NOTE ON/OFF signal of MIDI...

The Showtec NET-5 PoE is an power source equipment (PSE) that provides power over the ethernet cable. Also known as endspan or endpoint ethernet switch. Offering 5 x 1000BaseT Ethernet connectors with 4x PoE. The NET-5 includes power over ethernet transmission for maximum 4 Power devices (PD’s) with maximum power drain of 25W according to IEEE802.3af and IEEE802.3at.Specifications: Power Supply: 100~240VAC, 50/60Hz VACPower Consumption: 100 WWeight: 1.2 kgControl Mode: TCP/IPv4Ambient Temp.: 0 ~..

Pro2 Zip Case..