Showgear

19" blind plateAvailable in 1/2U, 1U, 2U, 3U and 4UBlackMetal The Showgear 19" Blind Plate is available in different heights (1/2U–4U). It is made out of 2 mm thick metal and has a scratch-resistant black powder coating. This blind plate can be used to neatly finish your rack. Rack Units: 0.5 ULength (mm): 483 mmDepth (mm): 10 mmHeight (mm): 22 mm..

Rechargeable RGB LED Gooseneck Rack MountSuitable for 19" rack or flight caseWW and CW LED tube with 56 pixelsDimmable1U5 V power adapter included The Showgear 19" Rack/flash light is an 1U panel including a rechargeable 56 LEDs Warm and Cold White tube light, suitable for additional lighting to any 19" rack or flight case. It has both a manual 0–100 % dimmer function and a touch button between CW (6500 K) and WW (3000 K) light. A 5 V power adapter is included. Light Source Type: LEDLED Colour T..

19" ventilation panelAvailable in different heights (1/2–2U)BlackMetal The Showgear 19" Ventilation Panel is available in 1/2U, 1U and 2U height. It is made out of 2 mm thick metal and has a scratch-resistant black powder coating. It can be used for heat dissipation. Internal devices can generate heat that can be easily escaped through these ventilation grids. Rack Units: 0.5 ULength (mm): 48 mmDepth (mm): 10 mmHeight (mm): 23 mm..

Dual RGB LED Gooseneck Rack MountSuitable for 19" rack or flight case1U heightManually dimmable lights with 6 LEDs each12 V power adapter included The Showgear 19 inch 2-way Rack Light is a 1U panel including double head manually dimmable RGB gooseneck lights with 6 COB LEDs each. It's suitable for additional light to a 19" Rack or 19" Flight Case. A 12 V power adapter is included. Light Source Type: LEDLight Source Power: 0.25 WLED Colour Type: R / G / BPower Supply: 12 V DCPower Connector In: ..

Easy to use crowd barrier. Equipped with an adjustable belt (maximum length 2 m) which can be attached to the second crowd barrier through an easy to use sliding mechanism. Height (mm): 890 mmBaseplate Diameter: 320 mmDiameter: 63 mmColour: Black..

Easy to use PRO crowd barrier with a 1.06 m pin and a 10 kg base. Equipped with an adjustable belt (maximum length 2 m) which can be attached to the second crowd barrier through an easy to use sliding mechanism. Baseplate Diameter: 345 mmDiameter: 70 mmWeight: 10.5 kgColour: Black..

Max output of 210 lumen3000 K colour temperature100 h lamp life15° beam angle The Showgear 4515 Par 36 is a very narrow 30 W halogen spot with screw terminal that is often used in professional effect lighting in discotheques. It has a maximum dimmable output of 210 lumens, but will not damage colour foils. In addition, it has a colour temperature of approximately 3000 K and a lifespan of approximately 100 hours. Light Source Type: HalogenLight Source Power: 30 WLight Socket: G53Luminous Flux (To..

Fits any 35 mm speaker standHolds 2 speakers (max. weight 10 kg per speaker)Adjustable width (320 to 510 mm) This adjustable T-bar is designed to fit any 35 mm speaker stand and holds 2 speakers (max. weight 10 kg per speaker). The width of the T-bar can be adjusted anywhere between 320 and 510 mm. Height (mm): 225 mmWidth (mm): 565 mmLength (mm): 90 mmMaterial: Metal..

Truss MountØ 35 mm/1.38" main tube, suitable for MT lifting towersSuitable for 30 & 40 cm truss made of Ø 48 and 50 mm truss tubesAdjustable distance between the truss tubesAll metal design for strength and durability This Showgear Adjustable Truss Mount Adapter is suitable for mounting Ø 2x 50 mm truss onto a Showtec MT (lifting) tower. Its strong steel design survives the rigours of frequent touring. Length (mm): 540 mmWidth (mm): 45 mmHeight (mm): 284 mmMain Tube Diameter: 35 mmWeight: 2.4 kg..

Easy right-angle rigging Angled design for perfectly horizontal orientation The Angled Arm Coupler MKII is designed to make right-angle rigging easy. With one single clamp, the coupler attaches to your truss and the angle in the tube makes it lay down perfectly horizontal. Stop struggling with multiple swivel clamps and fighting with truss braces that always seem to be in the way, and use the Angled Arm Coupler to save time, money, and weight. Available in brushed silver and powder coated black...

Easy right-angle rigging Angled design for perfectly horizontal orientation The Angled Arm Coupler MKII is designed to make right-angle rigging easy. With one single clamp, the coupler attaches to your truss and the angle in the tube makes it lay down perfectly horizontal. Stop struggling with multiple swivel clamps and fighting with truss braces that always seem to be in the way, and use the Angled Arm Coupler to save time, money, and weight. Available in brushed silver and powder coated black...